PRODUCTS
Main Business Area
Main Business Area
The tomorrow of LINESYSTEM becomes the future of the world.
cooling conveyer
NIR DRYER & COOLING CONVEYR-1
LSD-NIR SERIES
Characteristic
• Ultra high-dfficiency dryer, using the short wavelength light.
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
Option
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
1. COOLING by AIRCON
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
Specification
LSD-110NIR | |
Over All Length | 10.7m(Drying 5.9m + Cooling 4.8m) |
Conveyor Width | 2.5m × 2Rooms=5.0m |
In Conveyor Length | 450mm |
Out Conveyor Length | 450mm |
Heating Source | NIR Heater & FIN Heater |
Max.Temp | 180°C |
Temp.Control | PID Control by SCR |
Contorl Material | Teflon Mesh Belt(Mesh Pitch 5mm) |
Elec.Source(Drying) | 220V(380) × 3ph × 55kW |
Cooling Type | Forced Air-Cooling Type |
Elec.Source(Cooling) | 220V(380) × 3ph × 12kW |
Dimension(L × W × H) | 10.7m × 1390mm × 1660mm |
* Appearance and specifications in this homepage are subject to change without notice.
cooling conveyer
NIR DRYER & COOLING CONVEYR-1
LSD-NIR SERIES
Characteristic
• Ultra high-dfficiency dryer, using the short wavelength light.
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
Option
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
1. COOLING by AIRCON
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
Specification
LSD-110NIR | |
Over All Length | 10.7m(Drying 5.9m + Cooling 4.8m) |
Conveyor Width | 2.5m × 2Rooms=5.0m |
In Conveyor Length | 450mm |
Out Conveyor Length | 450mm |
Heating Source | NIR Heater & FIN Heater |
Max.Temp | 180°C |
Temp.Control | PID Control by SCR |
Contorl Material | Teflon Mesh Belt(Mesh Pitch 5mm) |
Elec.Source(Drying) | 220V(380) × 3ph × 55kW |
Cooling Type | Forced Air-Cooling Type |
Elec.Source(Cooling) | 220V(380) × 3ph × 12kW |
Dimension(L × W × H) | 10.7m × 1390mm × 1660mm |
* Appearance and specifications in this homepage are subject to change without notice.
cooling conveyer
NIR DRYER & COOLING CONVEYR-1
LSD-NIR SERIES
Characteristic
• Ultra high-dfficiency dryer, using the short wavelength light.
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
Option
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
1. COOLING by AIRCON
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
Specification
LSD-110NIR | |
Over All Length | 10.7m(Drying 5.9m + Cooling 4.8m) |
Conveyor Width | 2.5m × 2Rooms=5.0m |
In Conveyor Length | 450mm |
Out Conveyor Length | 450mm |
Heating Source | NIR Heater & FIN Heater |
Max.Temp | 180°C |
Temp.Control | PID Control by SCR |
Contorl Material | Teflon Mesh Belt(Mesh Pitch 5mm) |
Elec.Source(Drying) | 220V(380) × 3ph × 55kW |
Cooling Type | Forced Air-Cooling Type |
Elec.Source(Cooling) | 220V(380) × 3ph × 12kW |
Dimension(L × W × H) | 10.7m × 1390mm × 1660mm |
* Appearance and specifications in this homepage are subject to change without notice.
cooling conveyer
NIR DRYER & COOLING CONVEYR-1
LSD-NIR SERIES
Characteristic
• Ultra high-dfficiency dryer, using the short wavelength light.
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
Option
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
1. COOLING by AIRCON
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
Specification
LSD-110NIR | |
Over All Length | 10.7m(Drying 5.9m + Cooling 4.8m) |
Conveyor Width | 2.5m × 2Rooms=5.0m |
In Conveyor Length | 450mm |
Out Conveyor Length | 450mm |
Heating Source | NIR Heater & FIN Heater |
Max.Temp | 180°C |
Temp.Control | PID Control by SCR |
Contorl Material | Teflon Mesh Belt(Mesh Pitch 5mm) |
Elec.Source(Drying) | 220V(380) × 3ph × 55kW |
Cooling Type | Forced Air-Cooling Type |
Elec.Source(Cooling) | 220V(380) × 3ph × 12kW |
Dimension(L × W × H) | 10.7m × 1390mm × 1660mm |
* Appearance and specifications in this homepage are subject to change without notice.
cooling conveyer
NIR DRYER & COOLING CONVEYR-1
LSD-NIR SERIES
Characteristic
• Ultra high-dfficiency dryer, using the short wavelength light.
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
Option
(0.8 ~ 1.5㎛)
• Momentary ON-OFF switch that does not require preheating process.
• Direct heat energy transfer method not by the existing heat convection but by the light energy.
• The drying time can be shortened by around 50% compared to that of the existing thermal drying method.
• The energy, radiated to air, is less, and the energy density is high.
• Drying at a low temperature is available, which prevents deformation of a drying object due to heat, and allows easy cooling.
• Open frame makes cleaning and maintenance convenient.
• Low heat emission improves the work environment.
• Ultra high-speed drying reduces cost.
1. COOLING by AIRCON
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
2. FILTER of ASPIRATION
3. ANTI STATIC ELECTRICITY DEVICE
4. BELT CLEANING ROLLER5. TOUCH PANEL
Specification
LSD-110NIR | |
Over All Length | 10.7m(Drying 5.9m + Cooling 4.8m) |
Conveyor Width | 2.5m × 2Rooms=5.0m |
In Conveyor Length | 450mm |
Out Conveyor Length | 450mm |
Heating Source | NIR Heater & FIN Heater |
Max.Temp | 180°C |
Temp.Control | PID Control by SCR |
Contorl Material | Teflon Mesh Belt(Mesh Pitch 5mm) |
Elec.Source(Drying) | 220V(380) × 3ph × 55kW |
Cooling Type | Forced Air-Cooling Type |
Elec.Source(Cooling) | 220V(380) × 3ph × 12kW |
Dimension(L × W × H) | 10.7m × 1390mm × 1660mm |
* Appearance and specifications in this homepage are subject to change without notice.
가나다아아ㅏㅇ